Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Auris
    4. : 2018-2024 (E210)

Toyota Auris Years 2018-2024 (E210)

Toyota Auris (2018-2024 / E210)
How do you replace the battery of the Toyota Auris Hybrid?
In order to replace the battery of the Toyota Auris Hybrid, you need to loosen the screws that secure the rear seat bench of the car to their housing: once …read all…
Posted on 15 May 2024 by ScegliAuto
Toyota Auris (2018-2024 / E210)
Where is the hybrid battery filter located in the Toyota Auris?
In this video we see where it is located, and how to do the maintenance, of a filter still very little known: that of the hybrid car battery. In fact, if the …read all…
Posted on 15 April 2024 by ScegliAuto
Toyota Auris (2018-2024 / E210)
How to replace the battery of a Toyota Auris key.
To proceed with the replacement of the battery for the remote control key of a Toyota Auris car, you will first need to remove the metal key contained inside …read all…
Posted on 14 July 2023 by ScegliAuto
Toyota Auris (2018-2024 / E210)
How to adjust the time of the Toyota Auris
Today's guide will show us the steps on how to adjust the Toyota Auris clock by following the instructions below. First of all, we get on board the car and …read all…
Posted on 23 May 2023 by ScegliAuto
Toyota Auris (2018-2024 / E210)
How do you reset the Toyota Auris tire pressure warning light?
To be able to reset the Toyota Auris tire pressure warning light, you need to turn on the instrument panel, so that you can see that the corresponding warning …read all…
Posted on 27 November 2022 by ScegliAuto
Cigarette Lighter (1) Airbags (1) Shock absorbers (1) Antenna (1) Car stereo (1) Anti roll bar (1) Roof Rack Bars (1) Battery (9) Spark plugs (1) Key (8) Timing belt (1) -board computer (4) Checks and maintenance (37) Oil pan (1) Headlight (1) Tail light (10) Air filter (1) Cabin air filter (7) Diesel filter (4) Oil filter (3) Light bulb (5) Headlight bulb (12) Rear light bulb (8) Interior lights ceiling light bulb (2) License plate light (2) Engine oil (1) Door panel (4) Front bumper (1) Rear bumper (1) Hydraulic pistons (1) Tires (3) Gear Shift Knob (2) Instrument cluster (4) Wheel (1) Fuse box (10) Seat (2) Suspensions (1) Outside rearview mirror (2) Windscreen wipers (3)

See also:

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos