Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Auris
    4. : -board computer

Toyota Auris - -board computer

Toyota Auris (2012-2018 / E180)
How to reset the service light on the Toyota Auris
Resetting the service light on a Toyota Auris is a very simple operation, which can be done independently, thanks to our short video tutorial. To reset it, we …read all…
Posted on 10 March 2024 by ScegliAuto
Toyota Auris (2012-2018 / E180)
How to set date and time on Toyota Auris
To vary the date and time on our Toyota Auris we must look for the "disp" button on the steering wheel. We are going to press it until we get to the writing …read all…
Posted on 11 May 2023 by ScegliAuto
Toyota Auris (2007-2012 / E150)
How to reset the maintenance light of the Toyota Auris
If you want to manually reset the maintenance warning light on your Toyota Auris Mk1 but you don't know the necessary steps then this guide is all you need. It …read all…
Posted on 4 May 2024 by ScegliAuto
Toyota Auris (2012-2018 / E180)
How to reset from the Toyota Auris 2016 on-board computer
In this video we show you how to reset the Toyota Auris 2016 on-board computer. This is a very simple operation. Turn on and the instrument cluster. Then hold …read all…
Posted on 3 May 2024 by ScegliAuto
Cigarette Lighter (1) Airbags (1) Shock absorbers (1) Antenna (1) Car stereo (1) Anti roll bar (1) Roof Rack Bars (1) Battery (9) Spark plugs (1) Key (8) Timing belt (1) -board computer (4) Checks and maintenance (37) Oil pan (1) Headlight (1) Tail light (10) Air filter (1) Cabin air filter (7) Diesel filter (4) Oil filter (3) Light bulb (5) Headlight bulb (12) Rear light bulb (8) Interior lights ceiling light bulb (2) License plate light (2) Engine oil (1) Door panel (4) Front bumper (1) Rear bumper (1) Hydraulic pistons (1) Tires (3) Gear Shift Knob (2) Instrument cluster (4) Wheel (1) Fuse box (10) Seat (2) Suspensions (1) Outside rearview mirror (2) Windscreen wipers (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos