Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions to Replace the Master Cylinder on the Toyota Rav4 2.0 VVT-I

Model: Toyota Rav 4 MK 2, Xa20 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006

See other generations:
Video tutorial

Follow this procedure to remove and replace the master cylinder of the braking system and clutch pump on the Toyota Rav4 second series. First, open the bonnet of your car and start by removing the fluid reservoir, unscrewing the fixing screws and disconnecting the pipes from the master cylinder; then unscrew the fixing screws of the master cylinder to remove it and replace it with the new one. At this point, fit the new cylinder, reconnect the pipes, and pour the new brake fluid into the reservoir!


Updated on 24 April 2026 by ScegliAuto


Related tutorials

Guide to replacing the clutch on a Toyota RAV 4 2.0 VVT-I
Guide to replacing the clutch on a Toyota RAV 4 2.0 VVT-I
Toyota Rav 4 (2000-2006 / MK 2, Xa20) Today's main steps will show you how to remove and replace the clutch on the Toyota RAV 4 2.0 VVT-I. First, open the bonnet of the vehicle and start …
How to Replace the Spark Plugs on a Toyota RAV 4 2.0 VVT-I
How to Replace the Spark Plugs on a Toyota RAV 4 2.0 VVT-I
Toyota Rav 4 (2006-2013 / Xa30, MK 3) Below are the step-by-step instructions on how to remove and replace the spark plugs on a Toyota RAV 4 2.0 VVT-I. First, open the vehicle's bonnet an…
Instructions on When and How to Replace the Timing Belt on Toyota Rav4 2.0 D-4D
Toyota Rav 4 (2000-2006 / MK 2, Xa20) In today's guide, you will find all the necessary instructions on how and when to replace the timing belt on the second generation Toyota Rav4 with a…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos