Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch Safety Switch on the Toyota Yaris

Model: Toyota Yaris Xp130 - Years 2011-2019
Part: Clutch

This guide shows how to replace the clutch pedal safety switch on the Toyota Yaris. First, raise the steering wheel and push the driver's seat back to create more working space. Remove the lower dashboard cover and disconnect the connected electrical cables. Locate the switch position and unscrew the 12mm nut to extract the switch; disconnect the power cable and replace the part with the new element. Ensure it is installed correctly and re-tighten the fixing nut. Refit the dashboard panel and check the vehicle's correct operation.

Updated on 29 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch on the Toyota Yaris?
How to Replace the Clutch on the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) To replace the clutch on the Toyota Yaris, open the bonnet to access the components inside the engine bay. From here, you will need to unscrew the bo…
How do you adjust the clutch pedal of the Toyota Yaris?
How do you adjust the clutch pedal of the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) In order to adjust the clutch pedal of the Toyota Yaris, you need to locate the mechanism that operates the clutch master cylinder: this is positione…
How do you replace the clutch on a Toyota Yaris?
How do you replace the clutch on a Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) It will be possible to replace the clutch of the Toyota Yaris by lifting the car with a jack or a lift, so that the front wheels are not in contact w…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2005-2011 - How much does the Toyota Yaris clutch cost? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos