|
Do it yourself
| |||
| ||||
How to Replace the Auxiliary Belt on a Toyota Aygo
Model: Toyota Aygo
MK 1, Ab10
- Years 2005-2014
To change the auxiliary belt on a Toyota Aygo, open the bonnet of the vehicle. For safety, disconnect the negative terminal of the battery. The auxiliary belt drives the alternator that charges the battery, but it is also used for the power steering, air conditioning compressor, and water pump. To replace the belt, remove the right front wheel and lift the car. You also need to remove the wheel arch liner to access the belt. Now you can see the auxiliary belt. To remove it, spray some penetrating oil on the tensioner, then use a 12 mm socket to undo the tensioner locking bolt. With a 14 mm socket, try to loosen the upper bolt of the alternator. Use a 10 mm spanner to loosen the locknut of the tensioner. When the belt is loose, you can remove it. Check the tensioner; if necessary, it may need to be replaced. When fitting the new belt, pay attention to the direction of rotation; thread it through the various components according to the fitting diagram. Re-tighten the tensioner bolt, ensuring it is tight but not overly so, or it may be damaged. Remember to re-tighten the alternator bolt. Now refit the wheel arch liner. Reconnect the battery. You can refit the wheel and lower the car. Job done.
Updated on 31 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Toyota Aygo
(2005-2014 /
MK 1, Ab10)
To replace the drive belt on a Toyota Aygo, lift the car to completely remove the front right wheel. By loosening the screws that secure the wheel ar…
Toyota Aygo
(2021-2026 /
MK 3, Aygo X)
In this guide, we will explain the various steps you need to follow to manually reset the oil light on your Toyota Aygo X (2023). First, start the in…
Toyota Aygo
(2014-2023 /
Ab40, MK 2)
Let's see how to reset the TPMS (Tyre Pressure Monitoring System) light that comes on when the system detects a pressure difference or a sudden drop …
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.329
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |