Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS Light on Your Car Dashboard

Model: (Various brands) Various
Part:

The procedure shown in the video is a general one that may vary depending on the make and model, but it is fundamentally based on this. First, check the tyre pressures and adjust them to the recommended values from the manufacturer. You will find the correct value on a self-adhesive label located on the driver's door pillar or inside the fuel flap. The reset procedure may vary as follows: For some models, simply driving for a few minutes at speeds above 25 mph will reset the light. Others have a dedicated button located in the glove compartment or under the steering wheel (driver's side). Newer models perform the reset through the onboard computer menu, following the path "settings/service/tyres/reset pressure". If the light remains on despite all this, consider that it may be a faulty sensor or a dead battery; alternatively, there could be a fault in the system. In any case, you should consult an authorised workshop.

Posted on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

What does the TPMS warning light indicate?
What does the TPMS warning light indicate?
(Various brands) Various The TPMS light is the light that communicates that the tire pressure on a specific vehicle needs to be checked and adjusted. To adjust the tire press…
How to Reset the Emission Warning Light or Engine Fault Light
How to Reset the Emission Warning Light or Engine Fault Light
(Various brands) Various This video explains in detail how to reset the emission warning light, or engine fault light, in your car. If the light remains on a few seconds afte…
How to Replace the TPMS Valve and Reset the Dashboard Warning Light?
How to Replace the TPMS Valve and Reset the Dashboard Warning Light?
(Various brands) Various In this video, we will show you how to replace the TPMS valve and reset the dashboard warning light. Insert the diagnostic device into the OBD port a…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos