Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Refit the Rear Wheel of the Yamaha T Max 500

Model: (Various brands) Various
Part: Wheel

After removing the rear wheel of the scooter, follow the instructions below to refit it, using the tutorial video as a guide. Take the wheel axle pin and bring the complete wheel rim, brake disc, and bearing closer to the transmission. Insert the bush and the pin, then tighten the nuts from both sides, first from the side opposite the transmission and then from the other side using a socket spanner. Use a long metal profile to securely tighten the nuts. Further tighten the nut from the side opposite the transmission, and the job is complete.

Updated on 3 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Warning Light on the Yamaha X Max 300
How to Reset the Oil Warning Light on the Yamaha X Max 300
(Various brands) Various To reset the oil warning light on the Yamaha X Max 300, follow these steps: Turn off the ignition of the X Max, press and hold the mode and set butto…
Where to Find the Fuse Box on the Yamaha X Max 300
Where to Find the Fuse Box on the Yamaha X Max 300
(Various brands) Various If you are looking for the fuse box located inside your Yamaha X Max 300 but have not yet found it, just carefully read the following mini guide and …
How to replace the battery of a Yamaha Max 400
How to replace the battery of a Yamaha Max 400
(Various brands) Various In this video, you will learn how to replace the battery of a Yamaha Max 400. Obtain an Allen key and unscrew the bolts at the ends of the motorcycle…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos