Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Oil Filter Replacement

Model: Volkswagen Jetta A4, MK 4 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Engine oil

See other generations:
This video is currently unavailable

Lift the vehicle on a hydraulic lift or on suitable axle stands (if using a workshop jack, it is advisable to use a wooden block with a groove to accommodate the chassis rail). Remove the screws securing the splash guard and then unscrew the drain plug from the oil sump, placing a container of suitable capacity (approximately 5 litres) underneath.

Next, unscrew the oil filter located on the side, near the air conditioning pipes. Apply the new filter after coating the gasket with oil to improve adhesion and tighten it by hand.

Refit the oil sump plug and fill the engine with new oil according to the SAE specifications and the quantities indicated in the user manual. Start the engine for a few minutes and then check the engine oil level using the dipstick.


Updated on 3 February 2026 by ScegliAuto


Related tutorials

Engine Oil and Filter Replacement
Engine Oil and Filter Replacement
Volkswagen Jetta (1998-2005 / A4, MK 4) Position the vehicle on suitable car ramps to facilitate access to the oil sump. Remove the plastic undertray and unscrew the drain plug from the oil…
Engine Oil and Filter Replacement
Engine Oil and Filter Replacement
Volkswagen Jetta (2005-2010 / MK 5, A5) The drain plug for the used oil is located right in the centre of the oil sump: position a suitable container directly under the plug and unscrew it …
Oil Replacement on Volkswagen Jetta
Oil Replacement on Volkswagen Jetta
Volkswagen Jetta (2010-2018 / MK 6, A6) Do you want to replace the oil in the Jetta? Open the car door and pull up the engine bay release lever located at the bottom left of the dashboard a…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos