Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Cooling Radiator Replacement

Model: Volkswagen Golf MK 3, Golf III, Golf 3 - Years: 1991, 1992, 1993, 1994, 1995, 1996, 1997
Part: Radiator

See other generations:
This video is currently unavailable

Completely remove the front of the vehicle, including the bumper and both headlights. Remove the two side screws from the fan support and disconnect the electrical wiring connector to allow for their removal.

Position a container under the radiator to collect the coolant. Unscrew the hose clamps on the water inlet to the radiator and remove it. Also disconnect all return hoses.

Release the retaining springs at the bottom of the expansion tank and remove it from its housing. Install the new radiator, the expansion tank, and reconnect all hoses.

Refit the fan. Top up with the appropriate coolant. Start the engine, open the air bleed valve until fluid flows out to eliminate any air bubbles, and check for any leaks.


Updated on 3 February 2026 by ScegliAuto


Related tutorials

Replacing Coolant on Volkswagen Golf Mk4
Replacing Coolant on Volkswagen Golf Mk4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Today, in this video tutorial, you will see how to replace the coolant on a Volkswagen Golf fourth series. First, remove the old coolant from the rad…
How to Remove the Radiator and Cooling Fans from a Volkswagen Golf Mk5
How to Remove the Radiator and Cooling Fans from a Volkswagen Golf Mk5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) How do you remove the radiator and cooling fans from a Volkswagen Golf Mk5? Open the front bonnet, detach the engine soundproofing panel, then use a …
How to replace the water radiator on the Volkswagen Golf 2?
How to replace the water radiator on the Volkswagen Golf 2?
Volkswagen Golf (1983-1992 / Golf 2, MK 2) To replace the radiator on the Volkswagen Golf 2, first open the bonnet and then unscrew the cap of the coolant reservoir. Next, disconnect the coola…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos