Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : How to remove the window motor on Volkswagen Polo

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo 4, MK 4, Polo IV, 9N, MK IV - Years 2001-2009
Part: Window motor
Operation: How to remove the window motor on Volkswagen Polo

How to remove the window motor on a left door of a Volkswagen Polo? Let's see how to proceed: disconnect the battery terminals, with a screwdriver we go to detach the frame of the internal door handle, being careful not to break it. Once removed, unscrew the screws on the panel with a screwdriver or cordless screwdriver. We detach the door panel, unhook the clamps of the window lifters and speakers, detach the metal cover from the sheet metal, unscrew the window lifter motor with a key. We replace the piece and reassemble everything going backwards.


Posted on 30 October 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Polo 2001-2009 - How much does the Volkswagen Polo 9n electric window motor cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos