|
Do it yourself
| |||
| ||||
Replace the oil pump belt on a Volkswagen Golf 1.6 TDI EA288.
Model: Volkswagen Golf
MK 6, Golf VI, Golf 6, 5K1
- Years 2008-2012
Replacing the oil pump belt on an EA288 engine is a huge job, and absolutely not recommended for DIY. Essentially, to change that small belt, it is necessary to dismantle half of the machine and touch the timing belt. We have to remove the service belt, a large part of the mechanics, the timing belt, only to discover that there is no space to remove the oil pump belt, so we also have to remove the oil pan, drain the engine oil, remove all the bolts of the pan, detach it breaking the seal, and finally we can remove the belt and replace it. Now everything needs to be reassembled; reseal and reassemble the oil pan (a very delicate operation to avoid leaks), reassemble the timing belt, reassemble all mechanical components, top up all fluids. It is clear that it is not a job, but a project, and requires hours of work from an experienced mechanic; it requires specific equipment, maximum competence in timing and sealing. The money spent on a specialized workshop, in this case, will never be regretted.
Posted on 5 October 2025 by ScegliAuto
Video tutorial
Related tutorials
Volkswagen Golf
(2012-2019 /
Golf VII, MK 7, Golf 7)
The timing belt of the Volkswagen Golf 7 1.6 TDI must be replaced every 120,000 km, or every six years. Regardless of this rule set by the manufactur…
Volkswagen Golf
(2008-2012 /
MK 6, Golf VI, Golf 6, 5K1)
In this guide, we will discover the instructions that will allow us to dismantle and replace the water pump and timing belt of the Volkswagen Golf 2.…
Volkswagen Golf
(2012-2019 /
Golf VII, MK 7, Golf 7)
Below we will discover information on how to disassemble and replace the timing belt of the Volkswagen Golf 1.6 TDI; the manufacturer states that, on…
Other guides you may be interested in
|
How to Reset the Tyre Pressure Light on the Opel Grandland X
While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.145
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |