Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset the service warning of the Volkswagen Jetta.

Model: Volkswagen Jetta MK 6, A6 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Service warning light

See other generations:
Video tutorial

The instructions below will show us how to reset the service light for the regular maintenance of the engine oil change for the Volkswagen Jetta. First, we get into the vehicle and start pressing and holding the reset button located at the bottom right of the dashboard, then turn on the instrument cluster; we release the button after a few seconds and then press the left button on the dashboard once, confirming and executing the maintenance key reset, as shown in the video.

Finally, we turn off the dashboard and start the engine!


Posted on 19 January 2026 by ScegliAuto


Related tutorials

How to reset the oil light on the 2017 VW Jetta
How to reset the oil light on the 2017 VW Jetta
Volkswagen Jetta (2010-2018 / MK 6, A6) Today we will explain how to independently reset the oil light on a 2017 Volkswagen Jetta. We remind you that before resetting the light, it is neces…
Reset the maintenance (service) warning of the Volkswagen Jetta.
Reset the maintenance (service) warning of the Volkswagen Jetta.
Volkswagen Jetta (2018-2025 / A7, MK 7) Following the instructions in this guide, we will see how to reset the regular maintenance (service) warning of the Volkswagen Jetta. First, let's ge…
Resetting the tire pressure warning light of the Volkswagen Jetta
Resetting the tire pressure warning light of the Volkswagen Jetta
Volkswagen Jetta (2018-2025 / A7, MK 7) These short and simple instructions will show you how to reset the tire pressure warning of the Volkswagen Jetta; before resetting the TPMS sensors, …

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos