Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil Change on VW Golf

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Engine oil

See other generations:
Video tutorial

How to replace the oil in a Volkswagen Golf 4, let’s see how. Lift the car on a column lift and unscrew the oil sump plug, allowing the oil to drain into a container (tighten the plug after draining). Lower the car back to the ground, then open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard and lift the front bonnet, securing it. Using a strap wrench, unscrew the oil filter, remove it, and fit a new one, ensuring it is properly sealed around the thread.

Top up with new oil and check the level.


Updated on 15 March 2026 by ScegliAuto


Related tutorials

Replacing the Engine Oil Level Sensor on a Volkswagen Golf
Replacing the Engine Oil Level Sensor on a Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this brief guide, you will learn how to remove and replace the engine oil level sensor on a Volkswagen Golf. First, place the motorcycle on a stan…
Guide to replacing the engine oil pump of the Volkswagen Golf 1.8T
Guide to replacing the engine oil pump of the Volkswagen Golf 1.8T
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Today's main information will show us the process of disassembling and replacing the oil pump of the Volkswagen Golf 1.8T engine. In order to disasse…
Engine Oil and Oil Filter Replacement for Volkswagen Golf 4
Engine Oil and Oil Filter Replacement for Volkswagen Golf 4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In this video tutorial, you will learn how to replace the engine oil and oil filter of a Volkswagen Golf 4. First, lift the car and remove the Torx s…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos