Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : Polo 6R low beam replacement

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo MK V, MK 5, Polo V, Polo 5, 6R - Years 2009-2017
Part: Headlight bulb
Operation: Polo 6R low beam replacement

Do we want to remove the headlight bulbs of our Polo? Let's see the disassembly of the bulbs inside the Polo headlight. We open the bonnet by pulling the bonnet opening lever and put it in safety (we remove the headlight if there is little space). We detach the cover cap on the back of the headlight. At this point we will find in the internal part the bulbs with the lamp holders: we detach the lamp holders from the lighthouse. We fit the new bulbs, close the back of the headlight with its plastic cover. We close the engine compartment with the cover hood. We mount homologated bulbs of the same size.


Posted on 13 January 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Polo 2001-2009 - How do you replace the parking light bulb in the Volkswagen Polo 9n? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos