Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Fuel Pump on a VW Golf

Model: Volkswagen Golf MK 3, Golf III, Golf 3 - Years: 1991, 1992, 1993, 1994, 1995, 1996, 1997
Part: Fuel pump

See other generations:
Video tutorial

Let’s see how to remove the fuel pump from a Golf. Disconnect the battery cables, then remove the rear seat cushions of the car. Use a socket to unscrew the bolts securing the metal cap, and remove it from its seat. Use a chisel to unscrew the large securing pin of the fuel pump as shown in the video, disconnect the power connectors and the fluid circulation hoses.

Extract the floating fuel pump from its seat along with the attached parts. After installing the new fuel pump, reattach the tank covers and connect the electrical connectors.


Updated on 14 April 2026 by ScegliAuto


Related tutorials

How to Remove the Fuel Pump on Volkswagen Golf 5 1.9 TDI
How to Remove the Fuel Pump on Volkswagen Golf 5 1.9 TDI
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this tutorial, you will learn the main instructions for removing and replacing the fuel pump on a fifth-generation Volkswagen Golf with a 1.9 TDI …
How to Replace the Fuel Pump on a Volkswagen Golf?
How to Replace the Fuel Pump on a Volkswagen Golf?
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) To replace the fuel pump on a Volkswagen Golf, you need to unclip the fastening pins that secure the rear seat to its housing so that it can be remov…
Replacement of the water pump and timing belt of the Volkswagen Golf 2.0 TDI
Replacement of the water pump and timing belt of the Volkswagen Golf 2.0 TDI
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) In this guide, we will discover the instructions that will allow us to dismantle and replace the water pump and timing belt of the Volkswagen Golf 2.…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos