Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Bora
    4. : Egr valve disassembly instructions

Volkswagen Bora - Video tutorial

Model: Volkswagen Bora MK 6 - Years 1998-2005
Part: EGR valve
Operation: Egr valve disassembly instructions

First of all, it is suggested to carry out this maintenance with a cold engine. The EGR valve is located in the rear part of the engine: the first operation to be carried out is to disconnect the rubber sleeve that connects it to the intake duct; then the one connected to the membrane lung which controls the opening and closing of the valve. At this point, using a 5 mm hex wrench, unscrew the fixing pins of the exhaust manifold (which are located below) and then those fixing the valve itself to the intake manifold; finally, to complete disassembly, the small tube must be disconnected from the other lung.


Posted on 17 July 2023 by ScegliAuto



Disassembly and cleaning of the EGR valve
Volkswagen Bora (1998-2005 / MK 6) There are many devices that are used to reduce polluting emissions among these devices we find the EGR valve. Recycling of flue gases (in the context
Car PCV valve replacement
Volkswagen Bora (1998-2005 / MK 6) A PCV valve is a useful device that is one of the oldest emission control components in most vehicles. This valve returns partially burned gases from
Thermostatic valve replacement
Volkswagen Bora (1998-2005 / MK 6) If the thermostatic valve has to be replaced, it is advisable to carry out this maintenance with the engine cold to avoid unpleasant burns; in the ca

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos