Do it yourself
| ||||
|
Volkswagen Golf - Video tutorial
Model: Volkswagen Golf
Golf IV, MK 4, Golf 4
- Years 1997-2003 In order to replace the bulb that detects the water temperature in the Volkswagen Golf 4 radiator, the hood must be opened to gain access to the engine compartment. The bulb will be on the right side of the engine, on the driver's seat side, connected to a hose. To replace it, it will be necessary to remove its fixing clip, extract it from its housing and disconnect its plug. Once the old bulb has been removed from its plug, the new bulb can be connected. This will then have to be inserted again in its seat and fixed with its clip.
Posted on 1 March 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.027
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |