Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the EGR valve from the Volkswagen Golf 6?

Model: Volkswagen Golf Golf 6, MK 6, 5K1, Golf VI - Years: 2008, 2009, 2010, 2011, 2012
Part: Valve

See other generations:
Video tutorial

To remove the EGR valve from the Volkswagen Golf 6, open the bonnet to access the engine compartment and remove the upper engine cover; once this is removed, disconnect the hoses connected to the air filter box by removing the retaining rings. This will allow access to the valve located at the front of the engine.

By freeing it from the intake manifold and exhaust manifold, the EGR valve can be removed from its housing and possibly replaced with a new spare part.


Updated on 1 May 2026 by ScegliAuto


Related tutorials

How to Clean the EGR Valve of a Volkswagen Golf 1.9 TDI?
How to Clean the EGR Valve of a Volkswagen Golf 1.9 TDI?
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) The following steps will illustrate the procedure for removing and possibly replacing (or cleaning) the EGR valve of a Volkswagen Golf 1.9 TDI. First…
Replacing the EGR Valve on Volkswagen Golf 5
Replacing the EGR Valve on Volkswagen Golf 5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) The failure of the EGR valve can cause various issues in the vehicle such as injection problems and loss of power. First, secure the vehicle by engag…
How to Replace the EGR Valve on the Volkswagen Golf 1.6
How to Replace the EGR Valve on the Volkswagen Golf 1.6
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In this guide, we will see how to disassemble and replace the EGR valve on the Volkswagen Golf 1.6, following the instructions below. First, open the…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos