Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fuel Pump on the Volkswagen Polo

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Fuel pump

See other generations:
Video tutorial

If you need to replace the fuel pump on the vehicle, follow these instructions to assist you with the operation: First, open the tailgate and lift the carpet and load floor; beneath it is the compartment where the pump is located. First, disconnect the hose clamps of the two fuel lines and pull both hoses out. At this point, you can unscrew the cover of the pump assembly and lift it after disconnecting the electrical connector.

Beneath it is the pump itself, which can be removed from its housing and replaced if necessary.


Updated on 20 May 2026 by ScegliAuto


Related tutorials

Replacing the Fuel Pump on the Volkswagen Polo
Replacing the Fuel Pump on the Volkswagen Polo
Volkswagen Polo (1994-2003 / Polo 3, MK III, 6N, Polo III, MK 3) In this video, see the steps to remove and replace the fuel pump on the Volkswagen Polo, following the instructions below. First, access the rear of …
How to Replace the Fuel Pump on a VW Polo
How to Replace the Fuel Pump on a VW Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) Learn how to replace the damaged fuel pump on a Polo. First, remove the rear seat cushions, then take off the cover cap of the fuel pump. Once the ca…
Where is the Fuel Pump Relay Located on a Volkswagen Polo?
Where is the Fuel Pump Relay Located on a Volkswagen Polo?
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) The fuel pump relay on our Volkswagen Polo is located inside the lower area of the dashboard, beneath the steering column. To access it, start by unc…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos