Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on Volkswagen New Beetle

Model: Volkswagen New Beetle MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Warning light – error code

See other generations:
Video tutorial

This video tutorial shows how to reset the service light on the Volkswagen New Beetle. First, perform vehicle maintenance such as changing the engine oil and filters; after completing the DIY service, get in the car, engage the handbrake, turn on the ignition, and press the button located under the speedometer on the right; at this point, the display shows the message: "Do you really want to reset oil service?"; confirm by pressing the OK button on the steering wheel; then the display shows the message: "Service Reset". Turn off and restart the engine to verify the correct reset.


Updated on 29 May 2026 by ScegliAuto


Related tutorials

Resetting the TPMS Light on the Volkswagen New Beetle
Resetting the TPMS Light on the Volkswagen New Beetle
Volkswagen New Beetle (1999-2012 / 9C, MK 2) Today, follow these brief instructions to reset the tyre pressure monitoring system (TPMS) light on the Volkswagen New Beetle. Before performing the …
How to Reset the Multimedia System on the Volkswagen New Beetle
How to Reset the Multimedia System on the Volkswagen New Beetle
Volkswagen New Beetle (2011-2018 / MK 3) In this guide, you will learn how to factory reset the multimedia system on the Volkswagen New Beetle. First, get inside the vehicle and turn on the …
How to Reset the Service Light on a Volkswagen New Beetle
How to Reset the Service Light on a Volkswagen New Beetle
Volkswagen New Beetle (1999-2012 / 9C, MK 2) In this video, you will learn how to reset the service light on a Volkswagen "Beetle" New Beetle. First, turn off the ignition and press and hold the…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos