Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Cylinder Head Gasket on a Volkswagen Golf 5

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008
Part: Checks and maintenance

To replace the cylinder head gasket on a Volkswagen Golf 5, open the bonnet and remove the plastic cover from the top of the engine bay. Once this is removed, you can access the underlying parts by loosening all the screws that secure the top of the engine block. Before you can remove it, you will also need to remove the air filter box and its duct, along with other pipes that obstruct access to the engine. After removing all these parts, you can pull off the engine head and replace the gasket with a new one.

Updated on 30 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Today's main instructions will show you how to remove and replace the cylinder head gasket on a Volkswagen Golf 1.6. First, open the bonnet of the ve…
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Lift the vehicle and apply an axle stand to support it safely during disassembly. Compare the new tie rod end with the one to be removed to ensure co…
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) After machining the cylinder head, always check its flatness using a straight edge and a feeler gauge to exclude any deformations; repeat the same op…

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos