Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Jetta
    4. : Check distribution phase

Volkswagen Jetta - Video tutorial

Model: Volkswagen Jetta A4, MK 4 - Years 1998-2005
Part: Engine
Operation: Check distribution phase

Since the toothed belt synchronizes the opening and closing movement of the valves and this engine is equipped with an injector-pump, its timing is absolutely essential; in fact, for this operation, it is necessary to use a special template which allows to keep the camshaft pulley perfectly in position during the replacement of the belt itself. In addition, it is possible to check the advance or delay of the detonation with respect to the position of the pistons by means of specific diagnostic instruments and, if necessary, make corrections on the injection sequences to avoid the so-called knocks.


Posted on 7 August 2023 by ScegliAuto



How to replace the timing belt
Volkswagen Jetta (2005-2010 / MK 5, A5) The following video explains step by step how to replace the timing belt on a Volkswagen Jetta (the same procedure applies to similar engines). In th
Checks to be carried out on a Volkswagen Jetta MK5 with high mileage.
Volkswagen Jetta (2005-2010 / MK 5, A5) In this video, we will see what could be the major problems of a Volkswagen Jetta MK5 version, especially if it has high mileage. The first thing to
Check ECU fault memory
Volkswagen Jetta (2005-2010 / MK 5, A5) If almost all the fault warning lights remain on on the instrument panel display, it is necessary to proceed with a check of the fault memory of the

How to set the clock on the Yamaha Xmax 300

To change the time of the Yamaha Xmax 300, keep the "trip" button pressed, at the same time turn the ignition to "on"; release the "trip" button when the time starts flashing; briefly press the "trip" button to set the time; press and hold for a few seconds to confirm and move on to the minutes; briefly press the same button to set the minutes; we long press the same "trip" button to confirm; at this point in the meantime that we hold down the minutes stop flashing the time has been saved correctly and we can turn off the instrument panel.

Watch the video!


by ScegliAuto

More videos