Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Multifunction Steering Wheel in a Volkswagen Polo?

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Steering wheel

See other generations:
Video tutorial

In this tutorial, see how to install the multifunction steering wheel in a Volkswagen Polo. First, open the bonnet and disconnect the negative terminal of the battery, then go inside the cabin, remove the headlight switch, and create an extension for the red wire.

Next, remove the airbag by inserting a screwdriver into the indicated holes, unscrew the large bolt inside the steering wheel, and separate it from the steering column.

At this point, locate the BCM unit, make the necessary connections, and proceed with the installation of the new steering wheel by following the reverse procedure.


Updated on 16 June 2026 by ScegliAuto


Related tutorials

How to Remove the Steering Wheel on a Volkswagen Polo?
How to Remove the Steering Wheel on a Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) In this tutorial, you will see how to remove the steering wheel on a Volkswagen Polo. First, disconnect the negative terminal from the battery to avo…
How to Remove the Steering Wheel on a Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) The author of this video teaches how to remove and replace the steering wheel on a Volkswagen Polo, but the same procedure applies to similar models …
Where is the Fuse Box of the 2017 VW Polo Located?
Where is the Fuse Box of the 2017 VW Polo Located?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) The 2017 Volkswagen Polo has two fuse boxes. The first, known as the main fuse box, is located inside the cabin, specifically behind a panel under th…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos