Do it yourself
Frequently asked questions about cars and motorcycles

Throttle Body Replacement Instructions

Model: Volkswagen Polo MK IV, Polo IV, Polo 4, MK 4, 9N - Years 2001-2009
Part: Throttle body

Replacing the throttle body is quite simple and does not require special tools; start by removing the plastic cover on the engine, noting that in this model it integrates the air filter housing, so it is necessary to disconnect the intake duct hose, the vacuum tube, and the connector for the related sensor before lifting it. Once the cover is removed, the throttle body is clearly visible, and to replace it, simply disconnect the relevant connector and unscrew the fixing screws; then proceed in reverse for the installation of the new one.

Updated on 14 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) The video refers to a 1.2 TSI engine, and the operation described requires some skill. Obtain the replacement throttle body, which can be found on Am…
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) The instructions provided in this guide will allow us to eliminate the EPC warning light on the dashboard of the Volkswagen Polo 1.2. Usually, the EP…
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) To remove the EGR valve, open the bonnet, locate the valve, and loosen the clamp securing the pipe on the right side. Remove the rubber hose above th…

Other guides you may be interested in

How to Replace the Cabin Filter on the Opel Grandland X

If you own an Opel Grandland X and want to know the steps to replace the cabin air filter, carefully read the following guide and follow the described steps. First, enter the vehicle and go to the passenger side. Then, locate the box containing the air filter in the lower side area of the dashboard. Remove the cover of the box and finally replace the old filter with the new one. Refit the cover, and you are done.

Watch the video!


by ScegliAuto

More videos