Do it yourself
Frequently asked questions about cars and motorcycles

Instructions for Replacing the Alternator

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Alternator

See other generations:
Video tutorial

To replace the alternator, first remove the serpentine belt: lift the vehicle on suitable car stands to access the engine bay more easily; then loosen the tensioner of the auxiliary belt and free the pulleys after noting the routing; before continuing with the alternator removal, disconnect the battery, unplug the air conditioning compressor connector, and unscrew the relevant mounting bolts, leaving it hanging without disconnecting the pipes; then disconnect the connector from the alternator and the positive cable, and remove the tensioner to access the alternator's mounting bolts; at this point, you also need to remove the power steering pump, again without disconnecting the pipes, to free the alternator and extract it from its location by pulling it out from below.

Proceed in reverse for the installation of the new alternator.


Updated on 15 February 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) The following steps will guide us through the process of disassembling and replacing the alternator of the Volkswagen Golf 1.9 TDI. First of all, we …
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) To access the alternator, you must first remove the throttle body located at the front left of the engine (when viewed from the front): disconnect th…
Volkswagen Golf (1974-1983 / Golf 1, MK 1) Today we will discover the step-by-step instructions that will allow us to disassemble and replace the alternator of the Volkswagen Golf. First, we o…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos