Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Ignition Cylinder in a Volkswagen Jetta?

Model: Volkswagen Jetta MK 5, A5 - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Checks and maintenance

See other generations:
Video tutorial

In this tutorial, you will see how to remove the ignition cylinder in a Volkswagen Jetta, a straightforward task that requires good manual skills. First, disconnect the negative terminal of the battery, then unlock the steering column adjustment lever and undo the three screws securing the cover.

Next, remove the airbag by unlocking the securing clip at the back, undo the central bolt, and take the steering wheel off the column. Once done, remove the control levers by drilling out the indicated rivets, take out the cylinder, and disconnect the connector.


Updated on 5 July 2026 by ScegliAuto


Related tutorials

How to remove a broken key and disassemble the ignition cylinder of the Volkswagen Jetta
How to remove a broken key and disassemble the ignition cylinder of the Volkswagen Jetta
Volkswagen Jetta (2005-2010 / MK 5, A5) This guide provides instructions to remove a broken key from the ignition cylinder and how to replace the entire ignition lock of the Volkswagen Jett…
How to Remove the Third Brake Light on the Volkswagen Jetta
How to Remove the Third Brake Light on the Volkswagen Jetta
Volkswagen Jetta (2018-2025 / A7, MK 7) In this tutorial, you will see how to remove the third brake light on the Volkswagen Jetta, a very simple and quick operation. First, ensure that the…
How to Remove the Ignition Switch from the Volkswagen Jetta?
How to Remove the Ignition Switch from the Volkswagen Jetta?
Volkswagen Jetta (2005-2010 / MK 5, A5) To remove the ignition switch from the Volkswagen Jetta, first, loosen the clips securing the airbag at the centre of the steering wheel, allowing it…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos