Do it yourself
Frequently asked questions about cars and motorcycles
Video tutorial

To replace the glove compartment located in the centre console, follow the step-by-step instructions below for removal and reinstallation. First, access the rear seats and open the cup holder drawer to unscrew the screws inside.

Then, remove the drawer and unscrew the side screws that secure the upper trim behind the handbrake. Next, open the flap of the glove compartment and unscrew the fastening screws.

At this point, you can remove the compartment and proceed with its replacement, then reassemble all components in reverse order.


Updated on 21 July 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this video, see how to remove the glove compartment from a fifth-generation Volkswagen Golf. First, get inside the car and use a plastic lever to …
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) The steps shown in this guide will demonstrate how to remove and replace the glove compartment bulb in a Volkswagen Golf. First, get inside the vehic…
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) These are things that can happen: the credit card (or identity card, health card, or driver's license) gets stuck in the center console of our Volksw…

    Frequently Asked Questions

    • Golf 2008-2012 - How do you use the emergency boot release on a Volkswagen Golf 6? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos