Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the parking sensor buzzer located on the Volkswagen Golf?

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Parking sensors

See other generations:
Video tutorial

In this video, you can see where the parking sensor buzzer is located on the Volkswagen Golf, useful in case it stops working and you need to replace it. As shown, it is positioned beneath the dashboard, just above the clutch pedal. In the same position, you can find the control unit of the system.

To remove the buzzer, simply push it through the slot on the bracket to which it is attached, and once done, disconnect the power connector. To install the replacement, just follow the reverse procedure.


Updated on 7 August 2026 by ScegliAuto


Related tutorials

Deactivate Parking Sensors on VW Golf 7
Deactivate Parking Sensors on VW Golf 7
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Deactivating the parking sensors on a Volkswagen Golf 7 is a very simple procedure. To do this, get into the car, turn on the instrument cluster and …
How to Install or Replace Parking Sensors on the Volkswagen Golf
How to Install or Replace Parking Sensors on the Volkswagen Golf
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Today's instructions will guide you on how to install or replace the parking sensors on the Volkswagen Golf. The rear parking sensors are installed o…
Where is the parking sensor buzzer located in the Volkswagen Golf?
Where is the parking sensor buzzer located in the Volkswagen Golf?
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In this video, you can see where the parking sensor buzzer is located in the Volkswagen Golf and how to proceed if you need to replace it. As shown, …

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2008-2012 - Where is the parking sensor control unit of the Golf 6 located? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos