Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Jetta
    4. : Replacement of the Volkswagen Jetta heating radiator.

Volkswagen Jetta - Video tutorial

Model: Volkswagen Jetta A4, MK 4 - Years 1998-2005
Part: Passenger compartment heating radiator
Operation: Replacement of the Volkswagen Jetta heating radiator.

In this guide, we will see step-by-step instructions for disassembling and replacing the cabin heating radiator of the Volkswagen Jetta. First, we get into the car and start by removing the steering wheel and its airbag, disconnecting the electrical connector and unscrewing the central screw. Then, we remove the steering angle sensor and the instrument cluster, as shown in the video. At this point, we proceed to disassemble the entire central console, removing the car radio and the air conditioning controls; we also remove the glove compartment. Finally, we remove the dashboard, following the video tutorial until the end for the replacement of the heating radiator!


Posted on 15 September 2023 by ScegliAuto



How do you replace the heating radiator of the Volkswagen Jetta?
Volkswagen Jetta (2010-2018 / A6, MK 6) In order to replace the heating radiator of the Volkswagen Jetta, you need to loosen the screws and remove the clips that secure the side panel, loca
How do you replace the heating radiator of the Volkswagen Jetta?
Volkswagen Jetta (2010-2018 / A6, MK 6) The operation of replacing the heating radiator on the Volkswagen Jetta is carried out by loosening the screws that hold the plastic panel of the rig
How do you replace the heating radiator on the Volkswagen Jetta?
Volkswagen Jetta (2010-2018 / A6, MK 6) In order to replace the Volkswagen Jetta's heating radiator, the hood must be opened so that the rear part of the engine compartment can be accessed.

Other guides that may interest you

How to set the clock on the Yamaha Xmax 300

To change the time of the Yamaha Xmax 300, keep the "trip" button pressed, at the same time turn the ignition to "on"; release the "trip" button when the time starts flashing; briefly press the "trip" button to set the time; press and hold for a few seconds to confirm and move on to the minutes; briefly press the same button to set the minutes; we long press the same "trip" button to confirm; at this point in the meantime that we hold down the minutes stop flashing the time has been saved correctly and we can turn off the instrument panel.

Watch the video!


by ScegliAuto

More videos