Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volkswagen
  4. :
  5. Jetta
  6. : How to replace the interior headliner of the Volkswagen Jetta

Volkswagen Jetta - Video tutorial

Model: Volkswagen Jetta A4, MK 4 - Years 1998-2005
Part: Bodywork
Operation: How to replace the interior headliner of the Volkswagen Jetta

The detachment of the covering fabric of the under sky is a very common defect in several models; It is possible to remedy this problem by removing the old fabric and gluing a new one: this obviously requires the removal of the roof itself from the car; start by disconnecting the battery and then remove the plastic covering the windscreen pillars, those of the door pillars after removing the seat belts and those of the rear rear window pillars; you will continue by removing the grab handles, the sun visors, the courtesy lights but above all the rear parcel shelf and the rear seat backrest in order to extract the under-roof from the luggage compartment.


Posted on 17 September 2023 by ScegliAuto



How to remove the interior roof lining of the Volkswagen Jetta
Volkswagen Jetta (2005-2010 / MK 5, A5) Below we will see the instructions useful for disassembling and replacing the headliner or the interior lining of the roof of the Volkswagen Jetta. F
How do you replace the sky of the Volkswagen Jetta?
Volkswagen Jetta (2010-2018 / A6, MK 6) In order to replace the headliner of the Volkswagen Jetta, you need to completely remove the interior light fixture by disconnecting it from its hous
How to disassemble the roof of the Volkswagen Jetta
Volkswagen Jetta (2005-2010 / MK 5, A5) We see in this guide the main instructions that will allow us to remove and replace the headliner or the interior lining of the roof of the Volkswage

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos