Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of Steering Column for VW Passat

Model: Volkswagen Passat 3BG, B5 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Tie rods

See other generations:
This video is currently unavailable

First, check the relevant fuse for the steering equipment control. If the fuse is intact, proceed to remove the bolts securing the control arms to the wheel assembly.

Following the diagram in the video, identify the bolts to unscrew in order to remove all control arms. Next, remove the bolts securing the universal joint.

Once all bolts are removed, ensure you have support to hold all disassembled parts. Disconnect the connector from the power steering.

Now that you have extracted the entire steering branch assembly, you can also disassemble the steering arms. After performing the necessary maintenance, reassemble everything by following the steps in reverse.


Updated on 23 February 2026 by ScegliAuto


Related tutorials

How to Remove the Driver's Airbag from the Volkswagen Passat B7
How to Remove the Driver's Airbag from the Volkswagen Passat B7
Volkswagen Passat (2010-2014 / B7) This guide shows how to remove the driver's airbag from the Volkswagen Passat B7. The first step is to remove the two plastic finishing caps from the…
Removing the Steering Wheel Airbag on Volkswagen Passat
Removing the Steering Wheel Airbag on Volkswagen Passat
Volkswagen Passat (2005-2010 / B6, 3C) Unscrew the Torx T20 screw located under the steering wheel, as shown in the video, then pull the lever underneath the steering column to pull the st…
Dashboard and Air Conditioning Disassembly
Dashboard and Air Conditioning Disassembly
Volkswagen Passat (1996-2005 / 3BG, B5) Only perform this disassembly if you have the proper tools and good familiarity, as it is practically necessary to remove the dashboard and much of t…

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos