Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volkswagen
  4. :
  5. Passat
  6. : Engine oil filter replacement

Volkswagen Passat - Video tutorial

Model: Volkswagen Passat 3BG, B5 - Years 1996-2005
Part: Oil filter
Operation: Engine oil filter replacement

Using an articulated ratchet wrench, gently unscrew the oil filter by acting on the nut on the head and extract it from its seat. Empty the residual oil in the container and filter into a tray. Carefully clean the inside of the filter with a rag. Replace the rubber gasket of the container. Replace the used cartridge with a new one of the same type. Refit the oil filter being careful to screw it in correctly and top up with new oil if it is missing. Do not disperse the used oil in the environment but take it to the appropriate collection centers.


Posted on 25 June 2023 by ScegliAuto



Engine oil and filter replacement
Volkswagen Passat (1996-2005 / 3BG, B5) The oil filter is located immediately above the oil sump itself: to carry out this maintenance it is therefore advisable to lift the car on a lift to
How to replace an oil filter and oil on Volkswagen Passat
Volkswagen Passat (2005-2010 / 3C, B6) How to replace the oil filter and oil on Volkswagen Passat? Let's see in this video guide how to proceed with the replacement: open the car door and
Engine oil and filter replacement
Volkswagen Passat (1996-2005 / 3BG, B5) The first step is to remove the plastic motor protection. Using a ratchet wrench with joint and extension, gently unscrew the oil filter and extract

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos