Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the EGR Valve on the Volkswagen Golf?

Model: Volkswagen Golf Golf 6, MK 6, 5K1, Golf VI - Years: 2008, 2009, 2010, 2011, 2012
Part: EGR valve

See other generations:
Video tutorial

In this video, you can see where the EGR valve is located on the Volkswagen Golf and how to proceed if you need to replace it. As shown, the valve is positioned at the rear right of the engine, approximately at mid-height. To access it and subsequently replace it, start by lifting the front of the vehicle, then remove the right wheel, the wheel arch liner, the engine cover, and the air filter box. Continue by disconnecting the wheel hub, then extract the driveshaft and proceed to remove the valve.

To install the replacement, simply follow the reverse procedure.


Updated on 8 October 2026 by ScegliAuto


Related tutorials

How to Clean the EGR Valve of a Volkswagen Golf 1.9 TDI?
How to Clean the EGR Valve of a Volkswagen Golf 1.9 TDI?
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) The following steps will illustrate the procedure for removing and possibly replacing (or cleaning) the EGR valve of a Volkswagen Golf 1.9 TDI. First…
How to Replace the EGR Valve on the Volkswagen Golf 1.6
How to Replace the EGR Valve on the Volkswagen Golf 1.6
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In this guide, we will see how to disassemble and replace the EGR valve on the Volkswagen Golf 1.6, following the instructions below. First, open the…
Replacing the EGR Valve on Volkswagen Golf 5
Replacing the EGR Valve on Volkswagen Golf 5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) The failure of the EGR valve can cause various issues in the vehicle such as injection problems and loss of power. First, secure the vehicle by engag…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos