Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Rear Wheel Half Shaft

Model: Volvo S70 MK 1 - Years 1996-2000
Part: Axle shaft

Necessary tools: 18 and 19 mm socket spanner, a 5 mm Allen key, a T-47 Torx key, screwdriver set, large hammer. Obtain a replacement half shaft. Lift the vehicle on a ramp and remove the wheel. Remove the brake caliper and bracket to free the shaft. Remove the brake disc. Apply penetrating oil to the bolts securing the shock absorber and unscrew them. Also remove the bracket under the shock absorber's wing and free it from the arm. Remove the bracket under the vehicle's body that holds the half shaft. Now you can extract the half shaft. Remove the disc support and insert the new half shaft into the differential, then refit the bracket under the body. Refit the disc, brake caliper, shock absorber, and the wheel.

Updated on 3 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Front Wheel Drive Shaft
Removing Front Wheel Drive Shaft
Volvo S70 (1996-2000 / MK 1) Obtain a replacement drive shaft, then lift the vehicle on the ramp and remove the wheel. The necessary tools are: 18 mm and 19 mm socket spanners, a…
Wheel Removal and Reinstallation
Wheel Removal and Reinstallation
Volvo S70 (1996-2000 / MK 1) Lift the vehicle with the appropriate jack and secure it. To remove the wheel easily, it is advisable to use the proper socket wrenches, such as a lo…
Fuel Filter Replacement
Fuel Filter Replacement
Volvo S70 (1996-2000 / MK 1) Lift the vehicle on a lift or suitable ramps: the fuel filter is located underneath the vehicle, near the right rear wheel (it is cylindrical with tw…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos