Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. V70
    4. : Replacing the radiator of a Volvo V70

Volvo V70 - Video tutorial

Model: Volvo V70 MK 1 - Years 1996-2000
Part: Radiator
Operation: Replacing the radiator of a Volvo V70

Let's see the replacement of the radiator of a Volvo V70. We open the bonnet, remove the soundproofing panel of the engine; we disassemble the plates that block the radiator in the upper part, then we lift the car on a column bridge and remove the clamp from the water hose. We detach the various convoy sleeves of the refrigeration system with pliers. We extract the fan kit and immediately after the radiator from the engine compartment. Let's get ready to mount the new piece in the engine compartment: mount the cooling fans, clamps, pins and various pipes. We reassemble the anchoring brackets of the radiator with attached plates. We tighten the plastics and the front mask well with a socket wrench.


Posted on 26 November 2023 by ScegliAuto



How to disassemble the heating radiator mounted on a Volvo V70
Volvo V70 (1996-2000 / MK 1) Let's see how to remove the heating radiator mounted on a Volvo V70. First of all: we remove the plastic of the dashboard covering under the steering
How to replace the radiator fan on a Volvo V70
Volvo V70 (2000-2007 / MK 2) Before we can begin, we will have to go and open the front hood of our Volvo V70. So let's start by disengaging and removing the air filter sleeve co
Where is the fuse box located in the Volvo V70 2001?
Volvo V70 (2000-2007 / MK 2) If you want to discover where all the fuses of your second generation Volvo V70 (year 2001) are located, you simply need to read the instructions in

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos