Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Front Door Panel

Model: Volvo Xc90 MK 1 - Years 2002-2014
Part: Door trim panel

First, detach the plastic triangle located just behind the external rearview mirror; also disconnect the internal handle grip and then remove the screws underneath. At this point, unclip the retaining clips along the edges of the panel using a flat tool; disconnect the cable for the release lever and the connectors for the power window switch. From inside the panel, you can remove the screws for the release lever mounting bracket by detaching the outer trim. Reverse the process for reassembly.

Updated on 6 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Volvo Xc90 (2002-2014 / MK 1) First, remove the triangular plastic cover located near the outside rearview mirror; disconnect the cover of the internal handle and remove the screw…
Volvo Xc90 (2002-2014 / MK 1) In today's video, you will see the main instructions for removing the exterior door handle on a first-generation Volvo XC 90. First, open the front d…
Volvo Xc90 (2002-2014 / MK 1) First, you need to remove the door panel: the first step is to take off the inner handle of the panel (a screwdriver is sufficient to pry it off); be…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos