Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Car Radio

Model: Volvo S40 MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Car stereo

See other generations:
Video tutorial

This is an aftermarket car radio, not the original factory unit: to remove it, you need the specific extraction keys usually included in the radio's packaging. Start by removing the trim, then insert the extraction keys laterally to release the locking tabs from the support frame and pull the radio forward; disconnect the antenna cable and the power connector; for installation, reverse the process by reconnecting the antenna and power, and insert the radio into the frame until the tabs click into place, then reposition the trim.


Updated on 13 February 2026 by ScegliAuto


Related tutorials

Removal and Replacement of the Car Radio
Removal and Replacement of the Car Radio
Volvo S40 (1995-2004 / MK 1) To remove the car radio from the console, protect the gear knob with a cloth, then insert the appropriate tools or a coin into the side slots of the …
Removing Car Radio for iPod Kit Installation
Removing Car Radio for iPod Kit Installation
Volvo S40 (2004-2012 / MK 2) Using a plastic tool to avoid damaging the bodywork, lever at the base of the tunnel around the gearbox to release the plastic clips and move it to a…
Removing the Front Panel of a Volvo S40
Removing the Front Panel of a Volvo S40
Volvo S40 (2004-2012 / MK 2) As the video shows, first use a plastic lever to remove the cigarette lighter housing. Remove the two screws securing the front panel, then gently us…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos