Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Volvo V40?

Model: Volvo V40 MK 2 - Years 2012-2019
Part: Service warning light

On the Volvo V40, to reset the Service light, first turn on the ignition by rotating the key. Then, press and hold the OK button located at the end of the lever on the left side of the steering wheel. A red light will start to flash, and when it disappears completely from the instrument cluster, you can turn off the ignition. At this point, turn it on again and check that the Service light has gone out. You can verify the reset by turning the ignition off and on again.

Updated on 30 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the Service light on the Volvo V40?
How to reset the Service light on the Volvo V40?
Volvo V40 (2012-2019 / MK 2) On the Volvo V40, to reset the Service light, turn on the instrument cluster by turning the ignition key in the ignition switch, then press and hold …
How to Reset the Service Light on the Volvo V40?
How to Reset the Service Light on the Volvo V40?
Volvo V40 (2012-2019 / MK 2) To reset the Service light on the Volvo V40, turn on the instrument panel by rotating the key in the ignition switch, then press and hold the OK butt…
Resetting the Service Light on a Volvo V40
Resetting the Service Light on a Volvo V40
Volvo V40 (2012-2019 / MK 2) This guide shows the main steps to reset the service light for the regular oil change maintenance on a Volvo V40. First, get inside the vehicle and t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos