Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Access the OBD2 Port on a Volvo V70

Model: Volvo V70 MK 2 - Years 2000-2007

In this short video tutorial, you will learn how to independently access the OBD2 location port on a Volvo V70. The OBD2 port is essentially the onboard computer of your vehicle that monitors mileage, emissions, speed, and other data. This allows the mechanic to read the error code using a special diagnostic computer. In the case of the Volvo V70, to access the OBD2 port, simply open the driver's side door, and just below the steering wheel, you will find the port, usually protected by a hard plastic cover.

Updated on 26 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box located in the cabin of the Volvo V70 2011?
Where is the fuse box located in the cabin of the Volvo V70 2011?
Volvo V70 (2007-2016 / MK 3) In the following mini guide, we will discover together where the fuses of the cabin of your 2011 Volvo V70 are located. Fortunately, this is a very s…
How do you reset the Service light on the Volvo V70?
How do you reset the Service light on the Volvo V70?
Volvo V70 (2007-2016 / MK 3) The procedure for resetting the Service light on the Volvo V70 involves holding down the T1/T2 button located at the bottom right of the instrument p…
How do you reset the Service light on the Volvo V70?
How do you reset the Service light on the Volvo V70?
Volvo V70 (2007-2016 / MK 3) From the instrument panel of the Volvo V70, you can completely erase the Service light by holding down the button on the left side of the instrument …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos