Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the transmission system and ECU on an Audi A6 vehicle

Model: Audi A6 C8, MK 5 - Years 2018-2026
Part: Checks and maintenance

Today we will explain to you thanks to this short video tutorial how to reset the transmissions and ECU of the latest generation Audi A6. Let's start the reset by entering the vehicle and pressing the accelerator pedal all the way down for 30 seconds while starting the vehicle. We continue the reset by waiting for the warning light to turn off, then releasing the pedal and waiting 5 minutes before performing any other operation. After the 5 minutes have passed, we take the car for a test drive on the road and increase the engine speed. If the reset has been done correctly, the test will be successful, otherwise other warning lights will come on in the vehicle.

Posted on 30 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the transmission ECU control unit of the Audi A6.
How to reset the transmission ECU control unit of the Audi A6.
Audi A6 (2011-2018 / C7, MK 4) In this guide we will see the steps that will allow us to reset the ECU transmission control module of the Audi A6. First, we get into the car and st…
How to reset the service on an Audi A6 C6
How to reset the service on an Audi A6 C6
Audi A6 (2004-2012 / MK 3, C6) In this video, we see how to reset the service of the 2005 Audi A6, specifically the C6 version. On this version, it is not possible to perform a man…
How to disassemble the ABS brake control unit on Audi A6
Audi A6 (2004-2012 / MK 3, C6) Does the ABS control unit no longer work? Let's see how to take it apart. We open the engine compartment (front hood) and identify where to disassemb…

Other guides you may be interested in

How to Replace the Spark Plugs of the Chevrolet Spark

Release and lift the bonnet. The first step is to disconnect the battery plugs to protect all electronic components. Now, remove the bolts securing the cover to the engine, disconnecting the hose on the side as well. Disconnect the connectors on top of the coils and then remove the coils by pulling them straight up after removing the bolts that hold them in place. Now, using a socket wrench, unscrew the spark plugs from the bottom of the newly freed hole, taking care not to let too much dirt enter this cylinder.

Watch the video!


by ScegliAuto

More videos