Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to check the water temperature of the BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Checks and maintenance

The following video tutorial will explain how to check the water temperature of the BMW 3 Series E91 model. To perform this operation, we need to turn on the car's instrument panel and then press the BC button, located on the left lever of the steering wheel. Select the kilometers option, being careful not to reset it. By holding down the button, we enter the secret menu and under option number 7, we will find the engine temperature. Within the secret menu, it is also possible to check the battery watts and other temperatures important for the vehicle's performance.

Posted on 18 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Check Coolant Temperature on BMW 3 Series
How to Check Coolant Temperature on BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) To check the coolant temperature on your BMW 3 Series, you need to open the internal menu. Start by sitting in the driver's seat and then start the e…
Replacing Temperature Sensor on BMW 3 Series
Replacing Temperature Sensor on BMW 3 Series
BMW Serie 3 (1998-2006 / E46) How do you remove the temperature sensor on a BMW 3 Series? Raise the hood of the car to locate the temperature sensor and remove it. Remove the engi…
How to Replace the Temperature Sensor on a BMW 3 Series
How to Replace the Temperature Sensor on a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) This guide will show you how to remove and replace the coolant temperature sensor on a BMW 3 Series. First, open the hood of your car and disconnect …

Other guides you may be interested in

    Frequently Asked Questions

    • Serie 3 2012-2019 - How much does a service cost for the BMW 3 Series? Read answer
    • Serie 3 2005-2013 - Why is the on-board computer of the BMW 3 Series slow to start up? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos