Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on BMW 5 Series

Model: BMW Serie 5 F11, F10 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Door trim panel

See other generations:
Video tutorial

How to remove the door panel on BMW 5 Series, let's see how to proceed. Before starting the disassembly work, disconnect the battery terminals located in the engine compartment.

Use a lever or screwdriver to remove the trim from the panel; unscrew the screws with the screwdriver. Unscrew the remaining screws on the door panel and detach the retaining clips.

Disconnect the power connectors for the window regulator, the speaker located in the handle, and the tension cable for the door release lever. Finally, grasp the panel with your hands and pry it off the door.

Remove the adhesive covering on the door sheet metal and perform maintenance inside.


Updated on 9 March 2026 by ScegliAuto


Related tutorials

How to Remove and Replace the Door Panel of a BMW 5 Series
How to Remove and Replace the Door Panel of a BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) How to remove and replace the door panel of a BMW 5 Series? Use a pry tool to remove the plastic trim above the door panel. Then, unscrew the fasteni…
Remove the Door Panel on BMW 5 Series
Remove the Door Panel on BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) Replacing the cover panel on a BMW 5 Series? Let's see how to remove it. Remove the trim piece at the top of the panel (as shown in the video), and u…
Removing the Rear Door Panel of the BMW 5 Series
Removing the Rear Door Panel of the BMW 5 Series
BMW Serie 5 (2003-2010 / E60, E61) Today, let's go over the instructions to remove and replace the rear door panel of the BMW 5 Series. First, open the rear door of the vehicle and sta…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos