Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Fuel High-Pressure Pump on a BMW 3 Series?

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Pump

To remove the fuel high-pressure pump on a BMW 3 Series, open the hood and detach the plastic cover on top of the engine. Once this is removed, you can also take out the grille located just below the windshield. Now, disconnect the fuel lines to access the high-pressure pump, which is located at the bottom. This can be removed by loosening its mounting screws, and after removal, you can replace it with a new replacement part.

Updated on 30 May 2026 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 3 (1998-2006 / E46) In this guide, find the main instructions for removing and replacing the fuel pump on the BMW 3 Series. First, open the rear doors and start by remov…
BMW Serie 3 (1998-2006 / E46) Today, in this video tutorial, you will learn how to remove the fuel pump from a BMW 3 Series. First, open the trunk and remove the covering on the r…
BMW Serie 3 (2005-2013 / E91, E90, E92) To replace the fuel pump on a BMW 3 Series, remove the rear seat cushions by disengaging their retaining clips. Once the seats are removed, loosen th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos