|
Do it yourself
| |||
| ||||
Where to Find the Fuse Boxes of the BMW 320 E46
Model: BMW Serie 3
E46
- Years:
1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Video tutorial
In the BMW 3 Series E46, the cabin fuse box is located inside the glove compartment: inside it, at the top, there are two clips; you need to turn them and lower the panel. This way, you will be able to access the fuses. Behind this box, there is another smaller one that holds only five large fuses. Next to it, you will also find a relay box with five pieces. Additionally, you will find the headlight washer module and the air conditioning compressor relay. On the rear wheel arch on the passenger side, there is a small box with two large fuses. The heating fan relay is located on the back of the center console. On the right side of the trunk, you will find the rear window defroster relay: In the engine compartment, there is an electronic box against the right side of the body (thus in front of the driver).
Updated on 10 July 2026 by ScegliAuto
Related tutorials
BMW Serie 3
(1998-2006 /
E46)
In this video, you will see where the fuse boxes are located on the BMW E46 (produced from 1998 to 2006): The first fuse box is in the glove compartm…
BMW Serie 3
(1998-2006 /
E46)
This brief guide shows the location of the fuse boxes on the BMW 3 Series E46, following the instructions below. First, open the hood of your car and…
BMW Serie 3
(1998-2006 /
E46)
In this video we can see where the fuse boxes of the BMW 3 Series E46 version are located: we can find the first box inside the passenger compartment…
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.140
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |