Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Brake Service Light on a BMW 3 Series?

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Service warning light

In this tutorial, you will see how to reset the brake service light on a BMW 3 Series. This operation is extremely simple and quick, and should only be done after completing the required maintenance work. Start by inserting the key and turning on the ignition; it is not necessary to start the engine. Then, press and hold the button located to the left of the dashboard until the maintenance menu appears. Once this is done, scroll through the available services by quickly pressing the same button, and hold it again after reaching the one related to the brakes.

Updated on 4 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Brake Service on a BMW 3 Series?
How to Reset the Brake Service on a BMW 3 Series?
BMW Serie 3 (2012-2019 / F30, F31) In this tutorial, you will see how to reset the brake service on a BMW 3 Series, a very simple and quick operation to perform only after completing t…
How to Reset the Brake Pad Service Light on a BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) In this tutorial, you will learn how to reset the brake pad service light on a BMW 3 Series. This operation is extremely simple and quick, and should…
How to reset the brake pad service in the BMW 3 Series?
How to reset the brake pad service in the BMW 3 Series?
BMW Serie 3 (2012-2019 / F30, F31) In this tutorial we can see how to reset the brake pad service in the BMW 3 Series, an extremely simple and quick operation, to be carried out only o…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos