Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Filter Replacement

Model: Chevrolet Camaro MK 5 - Years 2007-2016
Part: Oil filter

Position the vehicle on a lift to facilitate access to the oil sump. Proceed by unscrewing the drain plug located on the side of the sump to drain the used oil, which should be collected in a suitable container and disposed of properly. Close to the sump is the oil filter: unscrew it using a socket wrench or adjustable spanner, and apply the new filter after coating the seal with oil (do not exceed the torque specification).
Finally, fill the engine with new oil according to the quantities and SAE specifications stated in the owner's manual.

Updated on 11 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Engine Oil and Filter Replacement
Engine Oil and Filter Replacement
Chevrolet Camaro (1993-2002 / MK 4) To facilitate the oil drainage from the sump, lift the vehicle on a hydraulic lift or suitable car ramps. Then, unscrew the drain plug located on the…
Engine Air Filter Replacement
Engine Air Filter Replacement
Chevrolet Camaro (2007-2016 / MK 5) The engine air filter housing (AIR BOX) is located at the front right of the engine bay (when facing forward), specifically on the driver's side, jus…
Guide to Replacing Engine Air Filter
Guide to Replacing Engine Air Filter
Chevrolet Camaro (1993-2002 / MK 4) A clogged air filter leads to reduced engine performance and excessive fuel consumption. Its function is to protect the engine by trapping impurities…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos