Do it yourself
| ||||
|
Citroen C3 - Video tutorial
Model: Citroen C3
SC
- Years 2009-2016 The car has two fuse boxes, the first in the passenger compartment under the dashboard to the left of the steering wheel and the second in the engine compartment next to the battery. The diagram of the box in the engine compartment is shown below: 1 Power supply for control unit engine, cooling fan control relay, main multifunction engine control relay, injection pump (Diesel). F2 horn. F3 Front/rear wipers. F4 Daytime fires. F5 Diesel heater (Diesel), diesel particulate filter additive pump (Diesel), air flow sensor (Diesel), EGR solenoid valve (Diesel), fuel pump (1.1 i and 1.4i), fan heater and solenoid valves (VTi). F6 ABS/ESP computer, secondary stop switch. F7 Electric power steering, automatic gearbox. F8 Starter control. F9 Switching and protection unit (Diesel). F10 Fuel heater (diesel), blower heater (1.1i, 1.4ie diesel), fuel pump (VTi), injectors and ignition coils (petrol), electronic thermostat and canister purge solenoid (1.1i and 1.4i) . F11 Heating fan. F12 Slow/fast speed wipers. F13 Integrated systems interface power supply (positive ignition). F14 Valvetronic power supply (VTi). F15 Headlights on the right. FA 16 Left headlights. F17 Left dipped beam headlights. F18 Right dipped beam headlights. F19 Oxygen sensors and solenoid valves (VTi), solenoid valves (Diesel), EGR solenoid valve (Diesel). F20 Pumps, electronic thermostat (VTi) water in fuel sensor (Diesel). F21 Fan control power supply, ABS/ESP. Maxi-fuses: MF1 Fan assembly. MF2 ABS/ESP pump. MF3 ABS/ESP solenoid valves. MF4 BSI power supply (Integrated Systems Interface). MF5 BSI power supply (Integrated Systems Interface). MF6 – Not used. MF7 – Passenger compartment fuse box.
Posted on 27 December 2022 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHandbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.111
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |