Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : Oil filter replacement on a Fiat 500

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2023
Part: Oil filter
Operation: Oil filter replacement on a Fiat 500

Replacing the oil filter on a Fiat 500? Let's see the disassembly of the filter. We open the car door and pull up the engine compartment opening lever located at the bottom left of the dashboard, lift up the front hood. We remove the soundproofing panel of the engine, then, with a socket wrench, unscrew the oil filter. We take out the worn filter and insert a new one. We lift the car with a jack and unscrew the pin from the oil pan, drain the oil into a container. We screw the pin of the oil pan and bring the car to the ground. We top up the engine with the new oil. We test the vehicle to finish.


Posted on 15 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 500 2012-2023 - Where is the Fiat 500 L oil filter located? Read Answer
    • 500 2014-2022 - How do you replace the engine oil filter in the Fiat 500x Multijet? Read Answer
    • 500 2014-2022 - How to replace the oil filter on the Fiat 500X? Read Answer
    • 500 2014-2022 - How to replace the oil filter on the Fiat 500X? Read Answer
    • 500 2014-2022 - Where is the oil filter located in the Fiat 500L? Read Answer
    • 500 2007-2023 - Where is the Fiat 500 oil filter located? Read Answer
    • 500 2014-2022 - Where is the oil filter on Fiat 500x? Read Answer
    • 500 2014-2022 - How to replace the oil filter on Fiat 500X 1.6 mjt? Read Answer
    • 500 2014-2022 - How much is the oil filter of the Fiat 500 s 2017? Read Answer
    • 500 2007-2023 - Where is the Fiat 500 engine oil filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos