Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine oil and oil filter of the Fiat 500 1.3 Multijet

Model: Fiat 500 312 - Years 2007-2022
Part: Engine oil

Let's see in this guide how to replace the engine oil and oil filter of the Fiat 500 1.3 Multijet, following these simple steps. First we lift the car and start unscrewing the oil vent bolt that we find on the sump, letting it drain into a container for about ten minutes; after which we unscrew the oil filter cartridge that we find on the engine compartment, using a socket wrench, as shown in the video. At this point we unscrew the filler cap and pour in the new engine oil, then check the level using the dipstick!

Posted on 18 April 2022 by ScegliAuto

Video tutorial

Related tutorials

Replacing the engine oil and oil filter on the Fiat 500 1.3 Multijet
Replacing the engine oil and oil filter on the Fiat 500 1.3 Multijet
Fiat 500 (2007-2021 / 312) In today's video tutorial we will see the step-by-step instructions to be able to perform the routine maintenance service of the oil change on the Fi…
How to replace the oil filter of the Fiat 500L 1.3 Multijet.
How to replace the oil filter of the Fiat 500L 1.3 Multijet.
Fiat 500 (2012-2021 / ) As shown in the video on how to change the oil filter in your Fiat 500 1.3 Multijet car, you first need to choose the right filter. There are two typ…
How to replace the engine oil and oil filter of the Fiat 500 1.3 Multijet
How to replace the engine oil and oil filter of the Fiat 500 1.3 Multijet
Fiat 500 (2007-2024 / 312) In order to perform the regular maintenance service (changing the engine oil and oil filter), it will be necessary to lift the vehicle; let's see the…

Other guides you may be interested in

How to Replace the Lift Supports on a Porsche 911

How to remove and replace the lift supports for the hood on a Porsche 911? Let's see how to replace them in this video: Lift the hood and secure it. Use a screwdriver or metal lever to detach the clips that hold the lift support at both ends (or unscrew the mounting pins). Install the new part onto the sheet metal of the front trunk, securing the lift support with the clips/pins. Proceed in the same manner for the removal/installation of the opposite lift support. Finally, test the gas springs installed earlier.

Watch the video!


by ScegliAuto

More videos