|
Do it yourself
| |||
| ||||
How to Replace the Radiator on the Fiat Panda
Model: Fiat Panda
169, MK 2
- Years 2003-2012
The first task is to remove the front bumper by unscrewing the upper screws, the lower screws, and the screws located in the wheel arch. Remove the crash bar, and now you need to unscrew the screw on the side of the air conditioning radiator to move it and work comfortably on the heating radiator. The pipes to remove are located behind the radiator, and once removed, you can take the radiators out from the clips that hold them on the grille. Now remove the last pipe that goes towards the engine. Move the first radiator and slightly pull forward the rear one, lifting it upwards. This will allow you to access its rear part to disconnect the fan connectors. Now all you need to do is lift the radiator and carry out the necessary operations.
Updated on 23 February 2026 by ScegliAuto
Video tutorial
Related tutorials
Fiat Panda
(1980-2003 /
141, MK 1)
In this tutorial video, you will learn how to remove and replace the engine cooling radiator on a Fiat Panda 141 1100 Petrol. First, open the bonnet …
Fiat Panda
(1980-2003 /
141, MK 1)
To replace the radiator on a Fiat Panda 141, open the bonnet to access the engine bay and loosen the screws located at the top of the front bumper. T…
Fiat Panda
(2003-2012 /
169, MK 2)
Today, let's see how to dismantle and replace the radiator and air conditioning pipes on the Fiat Panda. First, open the bonnet and begin to remove t…
Other guides you may be interested in
|
Where is the Fuel Filter Located in a Volvo XC60?
In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.084
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
